This section describes how you can handle exceptional conditions and warnings in an embedded SQL program. There are two nonexclusive facilities for this.
WHENEVER
command.
sqlca
variable.
One simple method to catch errors and warnings is to set a specific action to be executed whenever a particular condition occurs. In general:
EXEC SQL WHENEVERcondition
action
;
condition
can be one of the following:
SQLERROR
The specified action is called whenever an error occurs during the execution of an SQL statement.
SQLWARNING
The specified action is called whenever a warning occurs during the execution of an SQL statement.
NOT FOUND
The specified action is called whenever an SQL statement retrieves or affects zero rows. (This condition is not an error, but you might be interested in handling it specially.)
action
can be one of the following:
CONTINUE
This effectively means that the condition is ignored. This is the default.
GOTO label
GO TO label
Jump to the specified label (using a C goto
statement).
SQLPRINT
Print a message to standard error. This is useful for simple programs or during prototyping. The details of the message cannot be configured.
STOP
Call exit(1)
, which will terminate the
program.
DO BREAK
Execute the C statement break
. This should
only be used in loops or switch
statements.
DO CONTINUE
Execute the C statement continue
. This should
only be used in loops statements. if executed, will cause the flow
of control to return to the top of the loop.
CALL name
(args
)
DO name
(args
)
Call the specified C functions with the specified arguments. (This
use is different from the meaning of CALL
and DO
in the normal PostgreSQL grammar.)
The SQL standard only provides for the actions
CONTINUE
and GOTO
(and
GO TO
).
Here is an example that you might want to use in a simple program. It prints a simple message when a warning occurs and aborts the program when an error happens:
EXEC SQL WHENEVER SQLWARNING SQLPRINT; EXEC SQL WHENEVER SQLERROR STOP;
The statement EXEC SQL WHENEVER
is a directive
of the SQL preprocessor, not a C statement. The error or warning
actions that it sets apply to all embedded SQL statements that
appear below the point where the handler is set, unless a
different action was set for the same condition between the first
EXEC SQL WHENEVER
and the SQL statement causing
the condition, regardless of the flow of control in the C program.
So neither of the two following C program excerpts will have the
desired effect:
/* * WRONG */ int main(int argc, char *argv[]) { ... if (verbose) { EXEC SQL WHENEVER SQLWARNING SQLPRINT; } ... EXEC SQL SELECT ...; ... }
/* * WRONG */ int main(int argc, char *argv[]) { ... set_error_handler(); ... EXEC SQL SELECT ...; ... } static void set_error_handler(void) { EXEC SQL WHENEVER SQLERROR STOP; }
For more powerful error handling, the embedded SQL interface
provides a global variable with the name sqlca
(SQL communication area)
that has the following structure:
struct { char sqlcaid[8]; long sqlabc; long sqlcode; struct { int sqlerrml; char sqlerrmc[SQLERRMC_LEN]; } sqlerrm; char sqlerrp[8]; long sqlerrd[6]; char sqlwarn[8]; char sqlstate[5]; } sqlca;
(In a multithreaded program, every thread automatically gets its
own copy of sqlca
. This works similarly to the
handling of the standard C global variable
errno
.)
sqlca
covers both warnings and errors. If
multiple warnings or errors occur during the execution of a
statement, then sqlca
will only contain
information about the last one.
If no error occurred in the last SQL statement,
sqlca.sqlcode
will be 0 and
sqlca.sqlstate
will be
"00000"
. If a warning or error occurred, then
sqlca.sqlcode
will be negative and
sqlca.sqlstate
will be different from
"00000"
. A positive
sqlca.sqlcode
indicates a harmless condition,
such as that the last query returned zero rows.
sqlcode
and sqlstate
are two
different error code schemes; details appear below.
If the last SQL statement was successful, then
sqlca.sqlerrd[1]
contains the OID of the
processed row, if applicable, and
sqlca.sqlerrd[2]
contains the number of
processed or returned rows, if applicable to the command.
In case of an error or warning,
sqlca.sqlerrm.sqlerrmc
will contain a string
that describes the error. The field
sqlca.sqlerrm.sqlerrml
contains the length of
the error message that is stored in
sqlca.sqlerrm.sqlerrmc
(the result of
strlen()
, not really interesting for a C
programmer). Note that some messages are too long to fit in the
fixed-size sqlerrmc
array; they will be truncated.
In case of a warning, sqlca.sqlwarn[2]
is set
to W
. (In all other cases, it is set to
something different from W
.) If
sqlca.sqlwarn[1]
is set to
W
, then a value was truncated when it was
stored in a host variable. sqlca.sqlwarn[0]
is
set to W
if any of the other elements are set
to indicate a warning.
The fields sqlcaid
,
sqlabc
,
sqlerrp
, and the remaining elements of
sqlerrd
and
sqlwarn
currently contain no useful
information.
The structure sqlca
is not defined in the SQL
standard, but is implemented in several other SQL database
systems. The definitions are similar at the core, but if you want
to write portable applications, then you should investigate the
different implementations carefully.
Here is one example that combines the use of WHENEVER
and sqlca
, printing out the contents
of sqlca
when an error occurs. This is perhaps
useful for debugging or prototyping applications, before
installing a more “user-friendly” error handler.
EXEC SQL WHENEVER SQLERROR CALL print_sqlca(); void print_sqlca() { fprintf(stderr, "==== sqlca ====\n"); fprintf(stderr, "sqlcode: %ld\n", sqlca.sqlcode); fprintf(stderr, "sqlerrm.sqlerrml: %d\n", sqlca.sqlerrm.sqlerrml); fprintf(stderr, "sqlerrm.sqlerrmc: %s\n", sqlca.sqlerrm.sqlerrmc); fprintf(stderr, "sqlerrd: %ld %ld %ld %ld %ld %ld\n", sqlca.sqlerrd[0],sqlca.sqlerrd[1],sqlca.sqlerrd[2], sqlca.sqlerrd[3],sqlca.sqlerrd[4],sqlca.sqlerrd[5]); fprintf(stderr, "sqlwarn: %d %d %d %d %d %d %d %d\n", sqlca.sqlwarn[0], sqlca.sqlwarn[1], sqlca.sqlwarn[2], sqlca.sqlwarn[3], sqlca.sqlwarn[4], sqlca.sqlwarn[5], sqlca.sqlwarn[6], sqlca.sqlwarn[7]); fprintf(stderr, "sqlstate: %5s\n", sqlca.sqlstate); fprintf(stderr, "===============\n"); }
The result could look as follows (here an error due to a misspelled table name):
==== sqlca ==== sqlcode: -400 sqlerrm.sqlerrml: 49 sqlerrm.sqlerrmc: relation "pg_databasep" does not exist on line 38 sqlerrd: 0 0 0 0 0 0 sqlwarn: 0 0 0 0 0 0 0 0 sqlstate: 42P01 ===============
SQLSTATE
vs. SQLCODE
The fields sqlca.sqlstate
and
sqlca.sqlcode
are two different schemes that
provide error codes. Both are derived from the SQL standard, but
SQLCODE
has been marked deprecated in the SQL-92
edition of the standard and has been dropped in later editions.
Therefore, new applications are strongly encouraged to use
SQLSTATE
.
SQLSTATE
is a five-character array. The five
characters contain digits or upper-case letters that represent
codes of various error and warning conditions.
SQLSTATE
has a hierarchical scheme: the first
two characters indicate the general class of the condition, the
last three characters indicate a subclass of the general
condition. A successful state is indicated by the code
00000
. The SQLSTATE
codes are for
the most part defined in the SQL standard. The
PostgreSQL server natively supports
SQLSTATE
error codes; therefore a high degree
of consistency can be achieved by using this error code scheme
throughout all applications. For further information see
부록 A.
SQLCODE
, the deprecated error code scheme, is a
simple integer. A value of 0 indicates success, a positive value
indicates success with additional information, a negative value
indicates an error. The SQL standard only defines the positive
value +100, which indicates that the last command returned or
affected zero rows, and no specific negative values. Therefore,
this scheme can only achieve poor portability and does not have a
hierarchical code assignment. Historically, the embedded SQL
processor for PostgreSQL has assigned
some specific SQLCODE
values for its use, which
are listed below with their numeric value and their symbolic name.
Remember that these are not portable to other SQL implementations.
To simplify the porting of applications to the
SQLSTATE
scheme, the corresponding
SQLSTATE
is also listed. There is, however, no
one-to-one or one-to-many mapping between the two schemes (indeed
it is many-to-many), so you should consult the global
SQLSTATE
listing in 부록 A
in each case.
These are the assigned SQLCODE
values:
ECPG_NO_ERROR
)Indicates no error. (SQLSTATE 00000)
ECPG_NOT_FOUND
)This is a harmless condition indicating that the last command retrieved or processed zero rows, or that you are at the end of the cursor. (SQLSTATE 02000)
When processing a cursor in a loop, you could use this code as a way to detect when to abort the loop, like this:
while (1) { EXEC SQL FETCH ... ; if (sqlca.sqlcode == ECPG_NOT_FOUND) break; }
But WHENEVER NOT FOUND DO BREAK
effectively
does this internally, so there is usually no advantage in
writing this out explicitly.
ECPG_OUT_OF_MEMORY
)
Indicates that your virtual memory is exhausted. The numeric
value is defined as -ENOMEM
. (SQLSTATE
YE001)
ECPG_UNSUPPORTED
)Indicates the preprocessor has generated something that the library does not know about. Perhaps you are running incompatible versions of the preprocessor and the library. (SQLSTATE YE002)
ECPG_TOO_MANY_ARGUMENTS
)This means that the command specified more host variables than the command expected. (SQLSTATE 07001 or 07002)
ECPG_TOO_FEW_ARGUMENTS
)This means that the command specified fewer host variables than the command expected. (SQLSTATE 07001 or 07002)
ECPG_TOO_MANY_MATCHES
)This means a query has returned multiple rows but the statement was only prepared to store one result row (for example, because the specified variables are not arrays). (SQLSTATE 21000)
ECPG_INT_FORMAT
)
The host variable is of type int
and the datum in
the database is of a different type and contains a value that
cannot be interpreted as an int
. The library uses
strtol()
for this conversion. (SQLSTATE
42804)
ECPG_UINT_FORMAT
)
The host variable is of type unsigned int
and the
datum in the database is of a different type and contains a
value that cannot be interpreted as an unsigned
int
. The library uses strtoul()
for this conversion. (SQLSTATE 42804)
ECPG_FLOAT_FORMAT
)
The host variable is of type float
and the datum
in the database is of another type and contains a value that
cannot be interpreted as a float
. The library
uses strtod()
for this conversion.
(SQLSTATE 42804)
ECPG_NUMERIC_FORMAT
)
The host variable is of type numeric
and the datum
in the database is of another type and contains a value that
cannot be interpreted as a numeric
value.
(SQLSTATE 42804)
ECPG_INTERVAL_FORMAT
)
The host variable is of type interval
and the datum
in the database is of another type and contains a value that
cannot be interpreted as an interval
value.
(SQLSTATE 42804)
ECPG_DATE_FORMAT
)
The host variable is of type date
and the datum in
the database is of another type and contains a value that
cannot be interpreted as a date
value.
(SQLSTATE 42804)
ECPG_TIMESTAMP_FORMAT
)
The host variable is of type timestamp
and the
datum in the database is of another type and contains a value
that cannot be interpreted as a timestamp
value.
(SQLSTATE 42804)
ECPG_CONVERT_BOOL
)
This means the host variable is of type bool
and
the datum in the database is neither 't'
nor
'f'
. (SQLSTATE 42804)
ECPG_EMPTY
)The statement sent to the PostgreSQL server was empty. (This cannot normally happen in an embedded SQL program, so it might point to an internal error.) (SQLSTATE YE002)
ECPG_MISSING_INDICATOR
)A null value was returned and no null indicator variable was supplied. (SQLSTATE 22002)
ECPG_NO_ARRAY
)An ordinary variable was used in a place that requires an array. (SQLSTATE 42804)
ECPG_DATA_NOT_ARRAY
)The database returned an ordinary variable in a place that requires array value. (SQLSTATE 42804)
ECPG_ARRAY_INSERT
)The value could not be inserted into the array. (SQLSTATE 42804)
ECPG_NO_CONN
)The program tried to access a connection that does not exist. (SQLSTATE 08003)
ECPG_NOT_CONN
)The program tried to access a connection that does exist but is not open. (This is an internal error.) (SQLSTATE YE002)
ECPG_INVALID_STMT
)The statement you are trying to use has not been prepared. (SQLSTATE 26000)
ECPG_INFORMIX_DUPLICATE_KEY
)Duplicate key error, violation of unique constraint (Informix compatibility mode). (SQLSTATE 23505)
ECPG_UNKNOWN_DESCRIPTOR
)The descriptor specified was not found. The statement you are trying to use has not been prepared. (SQLSTATE 33000)
ECPG_INVALID_DESCRIPTOR_INDEX
)The descriptor index specified was out of range. (SQLSTATE 07009)
ECPG_UNKNOWN_DESCRIPTOR_ITEM
)An invalid descriptor item was requested. (This is an internal error.) (SQLSTATE YE002)
ECPG_VAR_NOT_NUMERIC
)During the execution of a dynamic statement, the database returned a numeric value and the host variable was not numeric. (SQLSTATE 07006)
ECPG_VAR_NOT_CHAR
)During the execution of a dynamic statement, the database returned a non-numeric value and the host variable was numeric. (SQLSTATE 07006)
ECPG_INFORMIX_SUBSELECT_NOT_ONE
)A result of the subquery is not single row (Informix compatibility mode). (SQLSTATE 21000)
ECPG_PGSQL
)Some error caused by the PostgreSQL server. The message contains the error message from the PostgreSQL server.
ECPG_TRANS
)The PostgreSQL server signaled that we cannot start, commit, or rollback the transaction. (SQLSTATE 08007)
ECPG_CONNECT
)The connection attempt to the database did not succeed. (SQLSTATE 08001)
ECPG_DUPLICATE_KEY
)Duplicate key error, violation of unique constraint. (SQLSTATE 23505)
ECPG_SUBSELECT_NOT_ONE
)A result for the subquery is not single row. (SQLSTATE 21000)
ECPG_WARNING_UNKNOWN_PORTAL
)An invalid cursor name was specified. (SQLSTATE 34000)
ECPG_WARNING_IN_TRANSACTION
)Transaction is in progress. (SQLSTATE 25001)
ECPG_WARNING_NO_TRANSACTION
)There is no active (in-progress) transaction. (SQLSTATE 25P01)
ECPG_WARNING_PORTAL_EXISTS
)An existing cursor name was specified. (SQLSTATE 42P03)